Product ID:ROYCO 13D
MSDS Date:03/02/1994
FSC:9150
NIIN:00-141-6770
MSDS Number: BXZGD

ROYAL LUBRICANTS COMPANY INC.

6 CAMPUS DR
PARSIPPANY, NJ 07054
US

Emergency Phone: 201-887-7411/800-424-9300(CHEMTREC)

Info Phone: 201-887-7410

Cage: 07950

ROYAL LUBRICANTS COMPANY INC.

518 EAST HANOVER, NJ 07936 US

Telephone: 973-887-7411/7410

Cage: 07950

PHENYLMETHYLSILOXANE

CAS: 63148-52-7

Fraction By Weight: 40-50%

POLYTETRAFLUOROETHYLENE

CAS: 116-14-3

RTECS: KX4025000

Fraction By Weight: 40-50%

PETROLEUM SULFONATE

CAS: 25619-56-1

Fraction By Weight: <3.0%

ORGANOPHILIC CLAY

CAS: 71011-25-1

Fraction By Weight: <3.0%

SODIUM CHROMATE (SARA 313) (CERCLA)

CAS: 7775-11-3

RTECS: GB2955000

Fraction By Weight: <1.0%

OSHA PEL C 0.1 MG (CRO3)/M3

ACGIH TLV: 0.05 MG(CR)/M3;A1;95

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

OTHER ADDITIVES

Fraction By Weight: <3.0%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE:BASED ON PRESENCE OF BARIUM
DINONYLNAPHTHALENE SULFONATE PROD IRRIT.SKIN:PROL/REP CONTACT MAY
CAUSE VAR DISORDERS(DERM,FOLLICULITIS,OIL ACNE).RELEASE DURING HI
PRESSURE USAGE MAY RESULT OIL INJECT ION INTO SKIN CAUSING LOC
NECROSIS.INHAL:DECOMPO PROD FUMES INDUCE TEMP INFLUENZE-LIKE SYMPT
DESCRIBED AS "POLYMER(SUPP)
Explanation of Carcinogenicity:PER MSDS:IARC/NTP DETERMINE SUFFICIENT
EVIDENCE FOR CARC IN EXP ANIMALS OF SODIUM CHROMATE.HEXAVALENT CHR
CMPDS.
Effects of Overexposure:IRRIT EYES/SKIN. DERM, FOLLICULITIES, OIL ACNE,
LOCAL NECROSIS FRM INJECTION WHICH IS EVIDENCED BY DELAYED ONSET OF
PAIN & TISSUE DMG A FEW HRS FOLLOWING INJECTION. POLYMER FUMES
FEVER:FEVER, COUGH, M ALAISE.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE & SKIN DISORDERS
MAY BE AGGRAVATED BY EXPO TO PRODUCT.

First Aid:EYE:FLUSH W/WATER FOR 15MINS OPN EYELIDS.GET MED ATTN.
SKIN:REMOVE CONTAMIN CLOTH.WIPE EXCESS OFF.WASH SKIN
W/SOAP/WATER/WATERLESS HAND CLEANER FOLLOWED BY SOAP/WATER.IRRIT
PERSIST GET MED ATTN.MATL I NJECTED INTO SKIN GET MED ATTN
PROMPTLYTO PREVENT SER DMG.DO NOT WAIT FOR SYMPTOMS TO DEVELOP.
INHAL:REMOVE TO FRESH AIR.BREATH DIFF PROVIDE OXY.GET MED ATTN.
INGEST:DO NOT INDUCE VOMIT.(SUPPLEMENT)

Flash Point Method:PMCC
Flash Point:509F,265C
Extinguishing Media:USE WATER FOG, DRY CHEMICL, CO2.DO NOT USE DIRECT
STREAM OF WATER.PROD WILL FLOAT & CAN REIGN ON SURFACE OF WATER.
Fire Fighting Procedures:DO NOT ENTER CONFINED FIRE SPACE W/O PPE
INCLUDING NIOSH APPROVED SELF-CONTAINED BREATHING APPARATUS.COOL
FIRE-EXPO CNTNRS/SURROUNDING EQPMT/STRUCTURES W/WATER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:SCOOP UP EXCESS GREASE. CLEAN AREA
W/APPROPRIATE CLEANER. PRODUCT CLASSIFIED AS OIL UNDER SEC 311
CLEAN WATER ACT.SPILLS ENTERING SURFACE
WATERS/WATERCOURSES/SEWERS/SURFACE WATERS CAUSE SHEEN MSUT BE
REPORTED TO NAT RESP CNTNR 800-424-8802.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL DRY PLACE W/ADEQU
VENTILATIN.KEEP AWAY FRM OPEN FLAMES/HIGH TEMPS.MIN SKIN CONTACT.
Other Precautions:HDLG PROCEDURES/SAF PRECAUT IN MSDS SHOULD BE
FOLLOWED TO MIN EMPLOYEE'S EXPO.AVOID EYE CONTACT.PROPERLY DISPOSE
OF CONTAMIN LEATHER ARTICLES INCLUDING SHOES THAT CAN'T BE
DECONTAMINATED.

Respiratory Protection:NOT ORDINARILY REQUIRED.
Ventilation:USE WITH ADEQUATE VENTILATION.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:CHEM GOGGLES IF EYE CONTACT/HI PRESSURE.
Other Protective Equipment:OIL RESISTANT CLOTHING AS NEEDED TO MIN SKIN
CONTACT.
Work Hygienic Practices:DO NOT REUSE CONTAMIN CLOTH TIL WELL
CLEANED.WASH W/SOAP/WATER BEF EAT/DRINK/SMOKE/TOILET USE.
Supplemental Safety and Health
THERM DECOMP PROD:DECOMP GAS INCLUDE
TFE:>800F,C3F6:>825F,COF2:>930F,PERFLUORISOBUTYLENE:>885F. HEALTH
HAZ:FUME FEVER".INGEST:NO SPEC INFO ID. 1STAID:IN GENERAL NO TREAT
NECESSARY UNLESS LG QUANT INGE ST.GET MED ADVICE.DR:IN GENERAL
EMESIS INDUCTION UNNECESARY IN HI VISC LOW VOLATILE PROD(MOST
OILS/GREASES).

HCC:V6
Solubility in Water:INSOLUBLE.
Appearance and Odor:SMOOTH YELLOW-GREY, SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID HEAT, OPEN FLAME & CONTACT W/STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:HIGHLY DEPENDENT ON COMBUST
CONDITONS.COMPLEX MIX OF AIRBORNE SOLID/LIQ/PARTI/GAS EVOLVE FRM
PYROLYSIS.TOXIC THERM(SUPP)

Waste Disposal Methods:CONTAINS BA & CR CMPDS.PER EPA-RCRA IF EXTRACT
AS MEASURED BY TCLP >100MG/L BA & >5MG/L CR THEN HAZ WASTE # D005 &
D007 RESP.REFER TO LATEST EPA/LOC REGS REGARDING DISPOSAL.MATL MATY
BE RECYCLED.USED OIL BURN FOR ENERGY RECOVERY.CHECK W/LOC/STATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.